Payment & Shipping Terms:
|Edge:||Folded||Product Name:||Stainless Steel Honeycomb Panel|
honeycomb stainless steel sheet,
honeycomb metal sheet
Backlit Use Stainless Steel Aluminum Honeycomb Panel with Colored Stainless Steel Surface Plate
The stainless steel honeycomb panel can be used as the backlit panel on the wall to perform as a good metal quality. The surface of the panel can be mill finished, brushed or colored stainless steel plates. Similarly to steel, stainless steel is a relatively poor conductor of electricity, with a lower electrical conductivity than that of copper.
Ferritic and martensitic stainless steels are magnetic. Annealed Austenitic stainless steels are non-magnetic. Work hardening can make austenitic stainless steels slightly magnetic.
Stainless Steel Honeycomb Panel is comprised with two stainless steel plates and one aluminum or stainless steel honeycomb core layer. The upper surface can be colorful oxidation film coated or diamond anti-skidding pattern stainless steel plates. The colorful oxidation film performs well on corrosion resistance and cannot be peered off by mechanical friction.
In metallurgy, stainless steel, also known as inox steel or inox from French "inoxydable", is a steel alloy with a minimum of 10.5% chromium content by mass.
Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high-salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.
Stainless steel differs from carbon steel by the amount of chromium present. Unprotected carbon steel rusts readily when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by forming more iron oxide; and, because of the greater volume of the iron oxide, this tends to flake and fall away. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal's internal structure, and, due to the similar size of the steel and oxide ions, they bond very strongly and remain attached to the surface.
|1||Variety of colors for selection with various of pattern|
|2||Good corrosion resistance, greatly better than the stainless steel of the same type and the original color.|
|3||Heat Resistance, soaked in boiling water for 28 days or exposed at the 200 °C for long time, no change on the color and luster.|
|4||Abrasion resistance and good scratch performance, no color change after eraser friction more 2000 times at the pressure 500g/cm2.|
|5||film flexibility, after 180°T bend test and 8mm cupping test, film is without any change.|
|6||Scrubbing resistance, applicable on washing with any organic solvent, neutral detergent or water if there is dirt on the surface.|
|7||Anti-pollution performance, the surface can be restored by washing.|
|8||aging resistance better than regular stainless steel|
|9||possessing advantages of the honeycomb panel: 1) lower density and big flexural rigidity; 2) super flat surface; 3) good performance on sound absorption and insulation as well as thermal insulation|
|10||safe on fire resistance: A2 grade|
Applicable on hotel, entertainment venues, high level exclusive shops, elevator panel, hall wall panel, carriage panel, backdrop, ceiling, decoration and signboard.