Payment & Shipping Terms:
|Material:||Stainless Steel||Thickness:||10mm, 15mm, 20mm, 25mm Etc|
|Surface Pattern:||Mill Finish||Function:||Anti-mildew|
|Application:||Indoor Or Outside Wall||Size:||1220*2440mm2|
honeycomb stainless steel sheet,
honeycomb metal sheet
Anti-mildew Stainless Steel Aluminum Honeycomb Panel for Indoor Wall Decoration
The stainless steel aluminum honeycomb core composite panel is now widely used for the indoor and outdoor decoration industry on the applications of cladding, ceiling and flooring. As the transportation and human activity, dust contamination not only happens in the urban area but also in rural places. The dust will be easily cumulated on the surface of both of indoor and outdoor building. When the dust cumulates to a certain thickness, with moisture contact or rainfall soaking, there occurs the mildew. It is a common problem for the buildings. The mildew spot is looked very badly and it will go spread with time goes by. The stainless steel honeycomb panel can resist to the dust accumulation and mildew spread.
Stainless Steel Honeycomb Panel is comprised with two stainless steel plates and one aluminum or stainless steel honeycomb core layer. The upper surface can be colorful oxidation film coated or diamond anti-skidding pattern stainless steel plates. The colorful oxidation film performs well on corrosion resistance and cannot be peered off by mechanical friction.
In metallurgy, stainless steel, also known as inox steel or inox from French "inoxydable", is a steel alloy with a minimum of 10.5% chromium content by mass.
Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high-salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.
Stainless steel differs from carbon steel by the amount of chromium present. Unprotected carbon steel rusts readily when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by forming more iron oxide; and, because of the greater volume of the iron oxide, this tends to flake and fall away. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal's internal structure, and, due to the similar size of the steel and oxide ions, they bond very strongly and remain attached to the surface.
|1||Variety of colors for selection with various of pattern|
|2||Good corrosion resistance, greatly better than the stainless steel of the same type and the original color.|
|3||Heat Resistance, soaked in boiling water for 28 days or exposed at the 200 °C for long time, no change on the color and luster.|
|4||Abrasion resistance and good scratch performance, no color change after eraser friction more 2000 times at the pressure 500g/cm2.|
|5||film flexibility, after 180°T bend test and 8mm cupping test, film is without any change.|
|6||Scrubbing resistance, applicable on washing with any organic solvent, neutral detergent or water if there is dirt on the surface.|
|7||Anti-pollution performance, the surface can be restored by washing.|
|8||aging resistance better than regular stainless steel|
|9||possessing advantages of the honeycomb panel: 1) lower density and big flexural rigidity; 2) super flat surface; 3) good performance on sound absorption and insulation as well as thermal insulation|
|10||safe on fire resistance: A2 grade|
Applicable on hotel, entertainment venues, high level exclusive shops, elevator panel, hall wall panel, carriage panel, backdrop, ceiling, decoration and signboard.