Signage Use Honeycomb Composite Panels With The Surface Reflective Film Coated

Signage Use Aluminium Honeycomb Panel with the Surface Reflective Film Coated and Edge Folded

Product Description

The reflective film is a kind of ready-for-use retroactive material. Before using, it has been made into a film produced by using glass bead technology, microprism technology, synthetic resin technology, thin film technology and microreplication technology.Usually there are lots of colors such as white, yellow, red, green, blue, brown, orange, fluorescent yellow, fluorescent orange, fluorescent yellow green, and fluorescent red and fluorescent pink available for being chosen.

Scrub the aluminum plate first and then dry the plates; paste the reflective film starting from the 2 cm position away from the edge of the aluminum plate back; pull the film to the front while turning back the plate and covering the edge;brush the backing paper side of the reflective film with special brush tools and at last push the film on the aluminum plate to avoid air bubbles.

Features

The center material is aluminum hexagonal honeycomb with a small density (about 3 to 7 kg per square meter), about 1/5 of the weight of wood with the same area and thickness, 1/6 of the glass, 1/7 of solid aluminium, which greatly reduced the building load and construction cost. Thanks to the air contained in the core, the panel can be sound and thermal insulated. Because of no combustible material contained, the fire rating can be at least B1 level. The panel performs well also on waterproof, moisture-proof, no harmful gas release, with a high unit mass of the specific strength and stiffness, not easy to deformation, completely overcoming the collapse and deformation in the center area if with large panel. The panel edge can be cut depending on real conditions. The PVDF coating can guarantee the product life more than 30 years.

After surface treated with corrosion resistant fluorocarbon resin, it can be widely used on curtain wall, roof, large façade, signs and interior decoration. The front plate of the aluminum honeycomb panel is painted with E. C. C. A. quality standards PVDF fluorocarbon paint with ordinary color or metallic color, so the surface has excellent weather resistance.

In case of heavy rain, there is particularly large noise when the raindrops hit the aluminum veneer or aluminum-plastic panel, while honeycomb panel can avoid this situation. Aluminum honeycomb panels are generally made of fluorocarbon coated aluminum plates. The continuous roller coating with PVDF material is the most important point to avoid color difference and flat coating film. Based on this, it can keep the exterior building with bright color for long time.

Mechanical Properties

Application: