Payment & Shipping Terms:
honeycomb structural panels,
honeycomb core board
High Strength Basalt Stone Honeycomb Composite Panels For Indoor Decoration
High Strength Basalt Stone Honeycomb Core Panel is a honeycomb backed panel with a basalt stone slice origined from Fuding area, Fujian province, China, which is known as the darkest basalt stone.
The ultra-thin stone honeycomb composite panels are innovated because of the limited natural stone resources and its application restrict. It is a new type of building materials with a better impact resistance than the ordinary natural stone is with a weight of only 16 kg, is only 1/6 of the weight of its original natural stone slide but the compressive strength is 6 times more than the original stone slices. The advantages as below:
1. Light weight
2. High strength
3. Increased anti-pollution ability
4. Easier control of uniform color
5. Easy installation
6. Workable at the area of regular stone not workable
7. Soundproof, moistureproof
8. Energy saving and consumption reduction
9. Reduce costs
Pasia stone Honeycomb Panel is grossly with an area weight of about 16 kg/ m2, which is approximately 1/5 of the solid stone. Thus, the labor, time, installation supporting facilities can be greatly saved especially considering the increased labor cost. By adding the honeycomb panel backing with high rigidity, Pasia Stone Honeycomb Panels shows excellent impact resistance and flexural strength and other mechanical performance. According to the testing result, the shock resistance performance value can be up to 60 times more than their solid stone veneer with 3 cm thickness.
|The marble veneer for the marble composite panel with aluminium plastic panel can be only 3 ~ 5mm thick. Commonly used composite panel with tiles or granite is only with a thickness of about 12mm. It saves much cost at least on the transportation. Accordingly, it is the best choice for the use on the building with a load limit.
|Marble sandwiched with the tiles, granite, aluminum honeycomb panels and other composite, the bending and fracture resistance, shear strength were significantly improved, which greatly reduce the breaking rate during transportation, installation and use.
|Improved anti-pollution ability
|Regular original marble plate will change color or with dirty pollution on the surface if using the cement wet pasting. While for the composite panel, as the dense and hard substrate and the glue film, the above mentioned situation will not happen.
|Easier to control color difference
|The marble veneer used on the marble composite panels is three or four times more than the original plate. Therefore, the color and pattern can be 3 or 4 times more the same as the original marble plate.
|Depending on the above characteristics, the efficiency and safety and costs of the installation process are greatly improved.
|Break the restricted area
|The original marble plate can be used on the inside and outside wall, ground, windowsill, porch, desktop, etc. But for the ceiling, no decoration company will take risk to use no matter it is marble or granite. The aluminum-plastic backed marble panels or aluminum honeycomb backed marble panel can break through the restricted area of stone honeycomb panel. Because it is very light that the weight of the whole body is only 1/5 to 1/10 of the original plate so that it is capable of being used on the ceiling.
|Further to the above mentioned, Stone aluminum honeycomb panel, after installation in the indoor and outdoor, can greatly reduce the consumption of electricity and heat.
|Due to thin and light stone composite material, it can save costs on transportation and installation. Furthermore, the finished composite stone panel will be more cost-efficient than their original plate.
Ship Partition, Decoration and etc