Payment & Shipping Terms:
|Material:||A3003 Or A5052||Surface:||Wood Pattern Veneer|
|Quality Guarantee Period:||10 Years||Size:||1220*2440 Mm2|
|Application:||Ship Wall Panels||Thickness:||12 Mm|
honeycomb structural panels,
honeycomb composite board
Wood Pattern Veneer Aluminium Honeycomb Panel with the Wood Frame for Yacht Wall
Wood Pattern Veneer Aluminium Honeycomb Panel with the Wood Frame for Yacht Wall is a conventional aluminum honeycomb structured panel with a surface of wood imitation pattern or bonded with a real solid wood veneer. The edge sealing of this type of panel is using wood frame edge sealing so that it is suitable for the after production processes. Modern yacht should be with a classical wooden pattern appearance which is like the historical boat, therefore the aluminum honeycomb partition wall panels should be with a wooden pattern.
1. The Wood veneer attached aluminum honeycomb composite panel is a regular aluminum honeycomb panel attached with a real wood veneer which is produced from the planted forest.
2. For some special projects, the designers want to get a real wood quality appearance but the real wood material is very easy to be corroded or broken because of the sunshine exposure (eg. The panel used beside the windows). Therefore, the wood veneer aluminum honeycomb panel is produced by Pasia to meet the owner or designer who has the above mentioned requirement.
3. The wood veneer bonded with the aluminum honeycomb panel is with a light weight and high strength. It cannot be easily damaged by outside shock because of the aluminum honeycomb backing can absorb most of the energy from outside so that the leftover for the bamboo veneer is very limited.
4. This structure makes the wood veneer aluminum honeycomb panel a longer life time.
Aluminum honeycomb panel is a bonded sandwich structure system of two surface aluminium plates and one honeycomb cores with a special purpose adhesive. Industrial used aluminium honeycomb panel will add some more processes such as surface treatment, edging, embedding, carving and so on to make the panel suitable for special conditions. It has been widely used by the industries of civil construction, transportation, exhibition, signage, elevator, clean room etc. The honeycomb technology is from aerospace technology. The whole production process is finished in the modern factory, using hot pressing or vacuum pressing technology. Due to the high thermal conductivity between the aluminum plates and honeycomb, it is synchronized the thermal expansion and contraction of the inside and outside aluminium material. There are small holes on the honeycomb core foil wall so that the air is free of flowing inside the panel box. Furthermore, sliding mounting buckle system does not cause structural deformation during thermal expansion and contraction.
The center material is aluminum hexagonal honeycomb with a small density (about 3 to 7 kg per square meter), about 1/5 of the weight of wood with the same area and thickness, 1/6 of the glass, 1/7 of solid aluminium, which greatly reduced the building load and construction cost. Thanks to the air contained in the core, the panel can be sound and thermal insulated. Because of no combustible material contained, the fire rating can be at least B1 level. The panel performs well also on waterproof, moisture-proof, no harmful gas release, with a high unit mass of the specific strength and stiffness, not easy to deformation, completely overcoming the collapse and deformation in the center area if with large panel. The panel edge can be cut depending on real conditions. The PVDF coating can guarantee the product life more than 30 years.
After surface treated with corrosion resistant fluorocarbon resin, it can be widely used on curtain wall, roof, large façade, signs and interior decoration. The front plate of the aluminum honeycomb panel is painted with E. C. C. A. quality standards PVDF fluorocarbon paint with ordinary color or metallic color, so the surface has excellent weather resistance.
In case of heavy rain, there is particularly large noise when the raindrops hit the aluminum veneer or aluminum-plastic panel, while honeycomb panel can avoid this situation. Aluminum honeycomb panels are generally made of fluorocarbon coated aluminum plates. The continuous roller coating with PVDF material is the most important point to avoid color difference and flat coating film. Based on this, it can keep the exterior building with bright color for long time.
|Unit theory weight||kg/m2||5.4||5.6||5.75|
|Bend elasticity rate||N/mm2||50000||40600||38.44|
|Temeprature total extension coefficient||D696||X10-6N/℃||0.24||0.24||0.24|
|Heat conduction rate||D976||Kcal/mhr℃||0.23||0.19||0.15|
|Heat transform temperature||D648||℃||200||200||200|
|Surtace smoothness||1mm/M.Maximum deviation:1mm/M|
|Flame retardabt property||Nonflammable,match relevant fire resistance standard|
|Soundproof function||Be decided by layout of printed sheet installation angle,0-3dB|