Payment & Shipping Terms:
|Base Material:||Sandstone, Limestone, Granite Etc||Size:||Customized|
composite stone cladding,
composite stone tiles
Customized Stone Facing Honeycomb Panel Of Wear-Resistant High-grade Furniture Decoration Materials
Stone-finished honeycomb panels are used as furniture for decorative materials. In recent years, decoration has occupied more and more. The facing stone honeycomb panel is mainly made of natural stone and high-strength honeycomb panel to form a composite panel with a sandwich structure.The wear resistance of stone furniture is very good, whether it is a bump with a hard object or a general friction, such furniture can withstand. The use of marble furniture does not have to worry about wear and tear. Its quality is very good, and the general wear marks are not obvious. It is a very good type of furniture.
|The standard composite panel comprising stone veneer with plastic laminated panels reinforced with honeycomb aluminium is 1/2 or 1/3 lighter than solid stone panel. This reduces the dead load of the building. As it is lighter, the erection speed is also improved, especially in high-rise building claddings. There is therefore savings in structural requirements, labour and time. Besides providing stability to the thin layer stone, the fabrication technique eliminates warpage – a natural characteristic often seen in long stone panels. The composite stone panel can be installed on most substrates using a variety of installation methods including adhesion or mechanical fastenings like concealed screws or interlocking channels.|
|2||Better impact resistance, flexural strength and water resistant||Composite stone panel has better impact resistance and flexural strength due to their backing support. The backing supportpanels can be flexed, making them ideal for a variety of architectural applications. They reduce the fragile and brittle properties of natural stones and can be used in place of natural stones for their aesthetic beauty. In addition, the epoxy skinned composite panel is impervious to water penetration, even with open structured stones such astravertine or limestone.|
|3||Increase stone utilization ratio||The use of thin stone veneer in composite panels maximizes the usage of natural stone. The utilization ratio is generally about 3 times higher than if the material comprise wholly of natural stone. For example, 1 m3 of raw stone can be used to fabricate up to 135 m2 of composite stone panels compared to about 45 m2 of natural stone panels. This is a more efficient use of limited resources, reduces the exploitation of natural resources and promotes environmental conservation. Furthermore, getting a larger quantity of stone veneer from a single block allows the manufacturer to achieve a more consistent tone and texture in the end-product|
|4||better flexural strength.||The thin polyester aluminum backing panel is about 2.5 to 4 mm thick and such composite panels are suitable for applications requiring light weight and thinness. It can be used for internal wall claddings, lift interiors and decorative ceilings. Apart from being light weight,the polyester aluminum panels are more even and resistant to corrosion and chemical attack.|
The natural stone from the quarry in the form of blocks are cut into thin slabs. They are bonded to backing panels by special resin followed by application of uniform heat and pressure to ensure proper bonding throughout the whole slab. Once the glue has set, the slab is sawn into half and the pieces are polished or honed. Finally, the pieces are cut to size mechanically according to customer’s requirements.
Stone Veneer Furniture Features
1. Concise: The stone itself has a certain pattern, so there is no need to design too many deliberate shapes when making furniture. The overall design feeling of stone furniture always gives a simple feeling, and the artistic atmosphere and modern simplicity are everywhere. Life creed.
2, the atmosphere: stone furniture through the different stone materials to reflect the unique temperament, each material can show a different style. After the stone is washed and tempered by nature, there is a sense of the atmosphere that other materials do not have.
3, refreshing: stone furniture makes good use of the natural cool feeling of stone. When used in summer, it can bring extra cool experience to consumers. It does not affect the use when the season is cold. Put a suitable cushion on the size. It is.
4, tough: stone furniture is made of real stone processing, so there is a certain amount of hard to move, in addition to the rough lines of stone furniture can always give a tough and solemn furniture fashion sense, through the embellishment of stone to create a tough atmosphere of furniture
They are used in a wide range of applications like exterior and interior wall claddings,elevators, over-lays, counter-tops and other special applications.