The Most Innovative Manufacturer of Honeycomb and Mineral Insulated Cable Products
The Most Innovative Manufacturer of Honeycomb and Mineral Insulated Cable Products
Product Details:
Payment & Shipping Terms:
|
| Material: | Stainless Steel | Thickness: | 8 Mm, 10 Mm, 12 Mm, 25 Mm, 40 Mm, 75 Mm, 100 Mm, 150 Mm, 200 Mm |
|---|---|---|---|
| Surface Pattern: | Mill Finished | Function: | Outdoor Decoration |
| Edge: | Folded | Product Name: | Stainless Steel Honeycomb Panel |
| High Light: | honeycomb stainless steel sheet,honeycomb metal sheet |
||
Width more than 1.2 meters Stainless Steel Aluminum Honeycomb Panel for Outdoor Decoration
Product Description
The original solid stainless steel plate can with a width more than 1.5 meters but for producing stainless steel honeycomb panel, the width is generally up to 1.2 meters. On the other hand, the outdoor decoration would require the stainless steel honeycomb panel as large as possible. The width may be required more than 1.2 meters. Pasia is able to supply this kind of panel products for a better appearance and easy installation application. The larger the panel is, there are shorter time required and lower cost may be required too.
It possesses good properties as below:
Organics
Types 316 and 317 are both useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect stainless steel under such conditions), though 317 provides the greatest level of resistance to corrosion. Type 304 is also commonly used with formic acid though it will tend to discolor the solution. All grades resist damage from aldehydes and amines, though in the latter case grade 316 is preferable to 304; cellulose acetate will damage 304 unless the temperature is kept low. Fats and fatty acids only affect grade 304 at temperatures above 150 °C (302 °F), and grade 316 above 260 °C (500 °F), while 317 is unaffected at all temperatures. Type 316L is required for processing of urea.
General Description
Stainless Steel Honeycomb Panel is comprised with two stainless steel plates and one aluminum or stainless steel honeycomb core layer. The upper surface can be colorful oxidation film coated or diamond anti-skidding pattern stainless steel plates. The colorful oxidation film performs well on corrosion resistance and cannot be peered off by mechanical friction.
In metallurgy, stainless steel, also known as inox steel or inox from French "inoxydable", is a steel alloy with a minimum of 10.5% chromium content by mass.
Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high-salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.
Stainless steel differs from carbon steel by the amount of chromium present. Unprotected carbon steel rusts readily when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by forming more iron oxide; and, because of the greater volume of the iron oxide, this tends to flake and fall away. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal's internal structure, and, due to the similar size of the steel and oxide ions, they bond very strongly and remain attached to the surface.
Characteristics:
| No. | Properties |
| 1 | Variety of colors for selection with various of pattern |
| 2 | Good corrosion resistance, greatly better than the stainless steel of the same type and the original color. |
| 3 | Heat Resistance, soaked in boiling water for 28 days or exposed at the 200 °C for long time, no change on the color and luster. |
| 4 | Abrasion resistance and good scratch performance, no color change after eraser friction more 2000 times at the pressure 500g/cm2. |
| 5 | film flexibility, after 180°T bend test and 8mm cupping test, film is without any change. |
| 6 | Scrubbing resistance, applicable on washing with any organic solvent, neutral detergent or water if there is dirt on the surface. |
| 7 | Anti-pollution performance, the surface can be restored by washing. |
| 8 | aging resistance better than regular stainless steel |
| 9 | possessing advantages of the honeycomb panel: 1) lower density and big flexural rigidity; 2) super flat surface; 3) good performance on sound absorption and insulation as well as thermal insulation |
| 10 | safe on fire resistance: A2 grade |
| 11 | environmental: recyclable |
Application
Applicable on hotel, entertainment venues, high level exclusive shops, elevator panel, hall wall panel, carriage panel, backdrop, ceiling, decoration and signboard.
