Payment & Shipping Terms:
|Material:||A3003 Or A5052||Edge:||Edge Sealed|
|Quality Guarantee Period:||15 Years||Size:||Customized|
|Application:||Ship, Yacht Walls||Thickness:||5mm, 12mm, 25mm|
lightweight wall panels,
honeycomb partition panels
Edge RHS Sealed Aluminium Honeycomb Wall Panel with Surface PVDF Powder Coated for Yacht
Edge RHS Sealed Aluminium Honeycomb Wall Panel with Surface PVDF Powder Coated for Yacht is an aluminum honeycomb panel with the edge RHS (Rectangular Hollow Section) sealed. The edge sealed aluminum honeycomb panel then is completely PVDF powder coated including the edge sealing section.
A. This process is to make the panel with a luxurious but rigid and anti-corrosion surface. The Powder Coating process will be versatile on the appearance of the yacht wall products. The powder coating process will make the aluminum surface more artistic and nice looking.
B. The PVDF powder coated aluminum honeycomb panel has been widely used more and more by the shipbuilding industry on the boat wall panel, partition panel and so on.
C. The weight is comparatively lighter than the same thickness solid panel but with a similar but more distributed strength than the solid material. To save the energy and power and increase the speeding efficiency, the modern boat requires a lighter body but the strength should be the same or higher, therefore, powder coated aluminum honeycomb panel is becoming an ideal choice for this kind of application.
D. The raw material, process and the final products of Pasia can completely meet or do better than the requirements to the DNV and LLoyds certificates
Aluminum honeycomb panel is a bonded sandwich structure system of two surface aluminium plates and one honeycomb cores with a special purpose adhesive. Industrial used aluminium honeycomb panel will add some more processes such as surface treatment, edging, embedding, carving and so on to make the panel suitable for special conditions. It has been widely used by the industries of civil construction, transportation, exhibition, signage, elevator, clean room etc. The honeycomb technology is from aerospace technology. The whole production process is finished in the modern factory, using hot pressing or vacuum pressing technology. Due to the high thermal conductivity between the aluminum plates and honeycomb, it is synchronized the thermal expansion and contraction of the inside and outside aluminium material. There are small holes on the honeycomb core foil wall so that the air is free of flowing inside the panel box. Furthermore, sliding mounting buckle system does not cause structural deformation during thermal expansion and contraction.
The center material is aluminum hexagonal honeycomb with a small density (about 3 to 7 kg per square meter), about 1/5 of the weight of wood with the same area and thickness, 1/6 of the glass, 1/7 of solid aluminium, which greatly reduced the building load and construction cost. Thanks to the air contained in the core, the panel can be sound and thermal insulated. Because of no combustible material contained, the fire rating can be at least B1 level. The panel performs well also on waterproof, moisture-proof, no harmful gas release, with a high unit mass of the specific strength and stiffness, not easy to deformation, completely overcoming the collapse and deformation in the center area if with large panel. The panel edge can be cut depending on real conditions. The PVDF coating can guarantee the product life more than 30 years.
After surface treated with corrosion resistant fluorocarbon resin, it can be widely used on curtain wall, roof, large façade, signs and interior decoration. The front plate of the aluminum honeycomb panel is painted with E. C. C. A. quality standards PVDF fluorocarbon paint with ordinary color or metallic color, so the surface has excellent weather resistance.
In case of heavy rain, there is particularly large noise when the raindrops hit the aluminum veneer or aluminum-plastic panel, while honeycomb panel can avoid this situation. Aluminum honeycomb panels are generally made of fluorocarbon coated aluminum plates. The continuous roller coating with PVDF material is the most important point to avoid color difference and flat coating film. Based on this, it can keep the exterior building with bright color for long time.
|Unit theory weight||kg/m2||5.4||5.6||5.75|
|Bend elasticity rate||N/mm2||50000||40600||38.44|
|Temeprature total extension coefficient||D696||X10-6N/℃||0.24||0.24||0.24|
|Heat conduction rate||D976||Kcal/mhr℃||0.23||0.19||0.15|
|Heat transform temperature||D648||℃||200||200||200|
|Surtace smoothness||1mm/M.Maximum deviation:1mm/M|
|Flame retardabt property||Nonflammable,match relevant fire resistance standard|
|Soundproof function||Be decided by layout of printed sheet installation angle,0-3dB|
Yacht wall panel