Aluminium Honeycomb Wall Panels With The Bamboo Pattern Veneer Acid Resistance

Aluminium Honeycomb Wall Panel with the Bamboo Pattern Veneer
 
Product Description
 
1. Aluminium Honeycomb Wall Panel with the Bamboo Pattern Veneer is bamboo pattern surface plates bonded with an aluminum honecomb structure, which are generally used for indoor wall panel.
 
2. Also there is another process is called imitation bamboo pattern surface plate aluminum honeycomb panel.
 
3. The real bamboo pattern imitation aluminum honeycomb panel is processed by vacuum and heating the bamboo pattern paper on the primers initially sprayed on the surface of the aluminum honeycomb panel. When the bamboo pattern penetrated into the primer, the bamboo imitation aluminum honeycomb panel is successfully produced.

 
The characteristics of the Bamboo imitation aluminum honeycomb panel
 
1. flat, nice and smooth aluminum surface
 
2. Very high coating layer rigidity and strong adhesion
 
3. Acid, boiling, weathering and alkali resistance and anti-shock performance
 
4. Better than the real bamboo decoration effect after the wood imitation treatment
 

General Description

Aluminum honeycomb panel is a bonded sandwich structure system of two surface aluminium plates and one honeycomb cores with a special purpose adhesive. Industrial used aluminium honeycomb panel will add some more processes such as surface treatment, edging, embedding, carving and so on to make the panel suitable for special conditions. It has been widely used by the industries of civil construction, transportation, exhibition, signage, elevator, clean room etc. The honeycomb technology is from aerospace technology. The whole production process is finished in the modern factory, using hot pressing or vacuum pressing technology. Due to the high thermal conductivity between the aluminum plates and honeycomb, it is synchronized the thermal expansion and contraction of the inside and outside aluminium material. There are small holes on the honeycomb core foil wall so that the air is free of flowing inside the panel box. Furthermore, sliding mounting buckle system does not cause structural deformation during thermal expansion and contraction.

Features

The center material is aluminum hexagonal honeycomb with a small density (about 3 to 7 kg per square meter), about 1/5 of the weight of wood with the same area and thickness, 1/6 of the glass, 1/7 of solid aluminium, which greatly reduced the building load and construction cost. Thanks to the air contained in the core, the panel can be sound and thermal insulated. Because of no combustible material contained, the fire rating can be at least B1 level. The panel performs well also on waterproof, moisture-proof, no harmful gas release, with a high unit mass of the specific strength and stiffness, not easy to deformation, completely overcoming the collapse and deformation in the center area if with large panel. The panel edge can be cut depending on real conditions. The PVDF coating can guarantee the product life more than 30 years.

After surface treated with corrosion resistant fluorocarbon resin, it can be widely used on curtain wall, roof, large façade, signs and interior decoration. The front plate of the aluminum honeycomb panel is painted with E. C. C. A. quality standards PVDF fluorocarbon paint with ordinary color or metallic color, so the surface has excellent weather resistance.

In case of heavy rain, there is particularly large noise when the raindrops hit the aluminum veneer or aluminum-plastic panel, while honeycomb panel can avoid this situation. Aluminum honeycomb panels are generally made of fluorocarbon coated aluminum plates. The continuous roller coating with PVDF material is the most important point to avoid color difference and flat coating film. Based on this, it can keep the exterior building with bright color for long time.

Mechanical Properties

Application:
 
Indoor cladding, partition, wall panels and so on