HPL Plate Bonded Honeycomb Wall Panelswith Wood Frame Edge Acid Resistance

HPL Plate Bonded Aluminium Honeycomb Wall Panel with Wood Frame Edge for Wall Use
 
Product Description
 

HPL Plate Bonded Aluminium Honeycomb Wall Panel with Wood Frame Edge for Wall Use is a type of fire prevention and environmental protection material bonded aluminum honeycomb panel.

There are many different standards with regards to fire-resistant and flame-retardant properties of pigh-pressure decorative laminates. While different countries may have different standards for the building industry to adhere to, most countries may agree on some of the more common standards being used in the industry. Very often, just like other standards applicable to the industry, the tests may be European Standards with their equivalent in the US Standards.

For example, many Commonwealth countries may be comfortable with the British Standards 476 especially Parts 6 and 7, while there will still be US Standard equivalence in the ASTM.

Features:

Ⅰlight weight, the volume density is small, about 211kg/m3, 1/13 of the construction gypsum, 1/15 of the ordinary cement, 1/2 of the normal honeycomb plate, and 1/2 of the lumber. For example, an 18mm thick HPL honeycomb panel is only 3.8kg/m2.

Ⅱ  High bending stiffness to weight. The 18mm thick HPL honeycomb panel possesses the equivalent
bending stiffness to the 4mm thick aluminum plate also with large plain compressive strength which can resist soft impact.
 

Ⅲ excellent flame retardant performance. HPL honeycomb panel is backed with and aluminum honeycomb panel and attached with a HPL panel with very limited combustible materials. According to GB 8624-2006, building materials and product combustion performance rating, the panel can be graded as A2.
 

Ⅳ Cost-effective. With same performance as aluminum honeycomb panel, but it is cheaper and lighter.
Specification: up to or less than 9000mm;1500 mm wide or less than; 4- 25 mm thick
 

General Description

Aluminum honeycomb panel is a bonded sandwich structure system of two surface aluminium plates and one honeycomb cores with a special purpose adhesive. Industrial used aluminium honeycomb panel will add some more processes such as surface treatment, edging, embedding, carving and so on to make the panel suitable for special conditions. It has been widely used by the industries of civil construction, transportation, exhibition, signage, elevator, clean room etc. The honeycomb technology is from aerospace technology. The whole production process is finished in the modern factory, using hot pressing or vacuum pressing technology. Due to the high thermal conductivity between the aluminum plates and honeycomb, it is synchronized the thermal expansion and contraction of the inside and outside aluminium material. There are small holes on the honeycomb core foil wall so that the air is free of flowing inside the panel box. Furthermore, sliding mounting buckle system does not cause structural deformation during thermal expansion and contraction.

Mechanical Properties

Application:

HPL Aluminum Honeycomb Wall Panel can be used in various wall applications such as living house, office, partition, elevator, ship and train compartment, etc