Payment & Shipping Terms:
|Material:||A3003 Or A5052||Surface:||Copper Veneer|
|Quality Guarantee Period:||15 Years||Size:||600*1200|
|Application:||Indoor Decoration||Thickness:||5mm, 12mm, 25mm|
lightweight composite board,
lightweight structural panels
Copper Veneer Attached Aluminium Honeycomb Composite Roof Panel for Luxurious Building Top
Copper Veneer Attached Aluminium Honeycomb Composite Roof Panel for Luxurious Building Top is Copper Veneer and aluminum honeycomb panel bonded composite panel. The thickness of the copper plate ranges from 0.3-1.5 mm. Aluminum honeycomb panel with an attached surface of copper plate has a luxurious copper surface but with light weight and cost efficient properties. This is widely used by the construction industry for achieving a luxurious quality effect.
1. The surface with a copper property with a luxurious appearance with various surface treatment to meet with different buildings’ requirement.
2. Copper oxide: can form a brown color with uniform appearance.
3. Vertigris board: for the use on a new building with special requirement or the building renovation.
4. Original copper plate: with the characteristic that the metallic luster gradually changes, making the building like having life.
5. Tin copper plate: can achieve titanium zinc plate effect.
6. Corrosion resistance is strong, even in highly corrosive atmospheric environment, the surface will form a strong, non-toxic zinc coating, commonly known as copper green, can automatically repair damaged protective layer, barely visible traces.The surface is super flat, small in density and high in bending resistance.Long service life, fire protection.Combustion performance reaches A2, environmental protection, recyclable.
Aluminum honeycomb panel is a bonded sandwich structure system of two surface aluminium plates and one honeycomb cores with a special purpose adhesive. Industrial used aluminium honeycomb panel will add some more processes such as surface treatment, edging, embedding, carving and so on to make the panel suitable for special conditions. It has been widely used by the industries of civil construction, transportation, exhibition, signage, elevator, clean room etc. The honeycomb technology is from aerospace technology. The whole production process is finished in the modern factory, using hot pressing or vacuum pressing technology. Due to the high thermal conductivity between the aluminum plates and honeycomb, it is synchronized the thermal expansion and contraction of the inside and outside aluminium material. There are small holes on the honeycomb core foil wall so that the air is free of flowing inside the panel box. Furthermore, sliding mounting buckle system does not cause structural deformation during thermal expansion and contraction.
The center material is aluminum hexagonal honeycomb with a small density (about 3 to 7 kg per square meter), about 1/5 of the weight of wood with the same area and thickness, 1/6 of the glass, 1/7 of solid aluminium, which greatly reduced the building load and construction cost. Thanks to the air contained in the core, the panel can be sound and thermal insulated. Because of no combustible material contained, the fire rating can be at least B1 level. The panel performs well also on waterproof, moisture-proof, no harmful gas release, with a high unit mass of the specific strength and stiffness, not easy to deformation, completely overcoming the collapse and deformation in the center area if with large panel. The panel edge can be cut depending on real conditions. The PVDF coating can guarantee the product life more than 30 years.
After surface treated with corrosion resistant fluorocarbon resin, it can be widely used on curtain wall, roof, large façade, signs and interior decoration. The front plate of the aluminum honeycomb panel is painted with E. C. C. A. quality standards PVDF fluorocarbon paint with ordinary color or metallic color, so the surface has excellent weather resistance.
In case of heavy rain, there is particularly large noise when the raindrops hit the aluminum veneer or aluminum-plastic panel, while honeycomb panel can avoid this situation. Aluminum honeycomb panels are generally made of fluorocarbon coated aluminum plates. The continuous roller coating with PVDF material is the most important point to avoid color difference and flat coating film. Based on this, it can keep the exterior building with bright color for long time.
|Unit theory weight||kg/m2||5.4||5.6||5.75|
|Bend elasticity rate||N/mm2||50000||40600||38.44|
|Temeprature total extension coefficient||D696||X10-6N/℃||0.24||0.24||0.24|
|Heat conduction rate||D976||Kcal/mhr℃||0.23||0.19||0.15|
|Heat transform temperature||D648||℃||200||200||200|
|Surtace smoothness||1mm/M.Maximum deviation:1mm/M|
|Flame retardabt property||Nonflammable,match relevant fire resistance standard|
|Soundproof function||Be decided by layout of printed sheet installation angle,0-3dB|
Luxurious Building Roof