Payment & Shipping Terms:
|Size In Mm*mm:
|Interior And Exterior Decoration
|Stone Honeycomb Panel
aluminium honeycomb sandwich panel,
stone aluminum honeycomb panel
Marble Countertops Decorated With Matte surface Stone Honeycomb Panels
The facing stone honeycomb panel is mainly made of natural stone and high-strength honeycomb panel to form a composite panel with a sandwich structure. At present, the commercial natural facing stone mainly includes marble, granite and slate. The surface finish of the facing stone has quite a variety of types, such as polished surface, matte surface, fired surface and so on. The matt surface is made by rough grinding and fine grinding of the flat plate with abrasive material, and the luminosity and color of the decorative surface are lower than the polished surface. This surface is smooth and porous. This textured finish is commonly used in public places. The color of the face is lighter than the polished surface.
Stone Honeycomb Panel
The ultra-thin stone honeycomb composite panels are innovated because of the limited natural stone resources and its application restrict. It is a new type of building materials with a better impact resistance than the ordinary natural stone is with a weight of only 16 kg, is only 1/6 of the weight of its original natural stone slide but the compressive strength is 6 times more than the original stone slices.
Completely overcomed the natural stone’s defects on weight, fragile and other aspects, it provides a more superior performance and wide application field as a new generation building material. Ultra-thin stone honeycomb composite panel is simply bonded with an about 3mm ~ 5mm thick stone sheet and an aluminum honeycomb substrate with a special purpose adhesive. It not only saves the stone material and reduces the weight of finished products, but reflects better in the stone effect. Based on these, there is a large demand from the market.
The advantages of the stone honeycomb panel:
|The marble veneer for the marble composite panel with aluminium plastic panel can be only 3 ~ 5mm thick. Commonly used composite panel with tiles or granite is only with a thickness of about 12mm. It saves much cost at least on the transportation. Accordingly, it is the best choice for the use on the building with a load limit.
|Marble sandwiched with the tiles, granite, aluminum honeycomb panels and other composite, the bending and fracture resistance, shear strength were significantly improved, which greatly reduce the breaking rate during transportation, installation and use.
|Improved anti-pollution ability
|Regular original marble plate will change color or with dirty pollution on the surface if using the cement wet pasting. While for the composite panel, as the dense and hard substrate and the glue film, the above mentioned situation will not happen.
|Easier to control color difference
|The marble veneer used on the marble composite panels is three or four times more than the original plate. Therefore, the color and pattern can be 3 or 4 times more the same as the original marble plate.
|Depending on the above characteristics, the efficiency and safety and costs of the installation process are greatly improved.
|Break the restricted area
|The original marble plate can be used on the inside and outside wall, ground, windowsill, porch, desktop, etc. But for the ceiling, no decoration company will take risk to use no matter it is marble or granite. The aluminum-plastic backed marble panels or aluminum honeycomb backed marble panel can break through the restricted area of stone honeycomb panel. Because it is very light that the weight of the whole body is only 1/5 to 1/10 of the original plate so that it is capable of being used on the ceiling.
|Sound insulation and moisture-proof
|An aluminum honeycomb backed stone panel transcends the properties of the original stone panel on the sound insulation, moisture and heat insulation and cold insulation performance because of the honeycomb structure.
|Further to the above mentioned, Stone aluminum honeycomb panel, after installation in the indoor and outdoor, can greatly reduce the consumption of electricity and heat.
|Due to thin and light stone composite material, it can save costs on transportation and installation. Furthermore, the finished composite stone panel will be more cost-efficient than their original plate.
High End Building indoor or outdoor decoration, countertop, elevator, ship and other transportation tooles inner decoration.