Payment & Shipping Terms:
|Stone Type:||Natural Stone||Size In Mm*mm:||800*800|
|Surface Treated:||Cutting Surface||Application:||Indoor|
|Product Name:||Stone Honeycomb Panel||Thickness:||20 Mm|
honeycomb marble panels,
stone aluminum honeycomb panel
Conventional Maintenance Of Stone Facing Honeycomb Panels
The stone honeycomb backing composite panels made up of a thin natural stone veneer reinforced with aluminum or fiberglass honeycomb backing. The stone veneer can be made from any stone from home and abroad.
Maintenance and maintenance of facing stone:
1. Always wipe, keep the surface clean, and regularly wax the glaze to make the stone surface look fresh.
2. Try to avoid chemical, alkali and other chemicals directly contacting the surface, causing chemical reactions, resulting in color differences.
3. Try to avoid the shoe nails directly and often rubbing the ground.
The advantages of the stone honeycomb panel:
|1||Light weight||The marble veneer for the marble composite panel with aluminium plastic panel can be only 3 ~ 5mm thick. Commonly used composite panel with tiles or granite is only with a thickness of about 12mm. It saves much cost at least on the transportation. Accordingly, it is the best choice for the use on the building with a load limit.|
|2||high strength||Marble sandwiched with the tiles, granite, aluminum honeycomb panels and other composite, the bending and fracture resistance, shear strength were significantly improved, which greatly reduce the breaking rate during transportation, installation and use.|
|3||Improved anti-pollution ability||Regular original marble plate will change color or with dirty pollution on the surface if using the cement wet pasting. While for the composite panel, as the dense and hard substrate and the glue film, the above mentioned situation will not happen.|
|4||Easier to control color difference||The marble veneer used on the marble composite panels is three or four times more than the original plate. Therefore, the color and pattern can be 3 or 4 times more the same as the original marble plate.|
|5||Easy installation||Depending on the above characteristics, the efficiency and safety and costs of the installation process are greatly improved.|
|6||Break the restricted area||The original marble plate can be used on the inside and outside wall, ground, windowsill, porch, desktop, etc. But for the ceiling, no decoration company will take risk to use no matter it is marble or granite. The aluminum-plastic backed marble panels or aluminum honeycomb backed marble panel can break through the restricted area of stone honeycomb panel. Because it is very light that the weight of the whole body is only 1/5 to 1/10 of the original plate so that it is capable of being used on the ceiling.|
|7||Sound insulation and moisture-proof||An aluminum honeycomb backed stone panel transcends the properties of the original stone panel on the sound insulation, moisture and heat insulation and cold insulation performance because of the honeycomb structure.|
|8||Energy saving||Further to the above mentioned, Stone aluminum honeycomb panel, after installation in the indoor and outdoor, can greatly reduce the consumption of electricity and heat.|
|9||Cut costs||Due to thin and light stone composite material, it can save costs on transportation and installation. Furthermore, the finished composite stone panel will be more cost-efficient than their original plate.|
Facing stone honeycomb panel is generally used on the elevator cabin, countertop, backlit area and so on for the indoor decoration.