Payment & Shipping Terms:
|Size In Mm*mm:
|Indoor And Outdoor Decoration
|Customized Marble Stone Honeycomb Panel
|20, 25 Mm Or Customized
lightweight composite board,
lightweight structural panels
Ultra Thin Stone Honeycomb Panel For Multi Purpose Indoor And Outdoor Decoration
Ultra-thin Stone Honeycomb Panel For Multi-purpose Indoor And Outdoor Decoration
Ultra-thin marble aluminum honeycomb panels are typically 3-5mm thick stone veneers and 10-25mm thick aluminum honeycomb backings bonded with special adhesives. For different purposes, the thickness of stone and honeycomb panels is also different: for outdoor walls, it is recommended that the thickness of the stone section is 4-5mm, the thickness of the aluminum honeycomb panel is not less than 25mm, the thickness of the inner wall, the thickness of the stone is 3-4mm, and the thickness of the aluminum honeycomb panel is 15mm. For the ceiling, the recommended thickness is 3-4mm, the thickness of the aluminum honeycomb panel is 15-20mm; for the floor, the thickness of the stone is 5-8mm, and the thickness of the aluminum honeycomb panel is 10-15mm. Ultra-thin marble stone honeycomb panels are a demanding product. We need to produce qualified products in strict accordance with the requirements to meet the market and protect the environment.
See the marble stone honeycomb panel, I believe we can also imagine the appearance and shape of this kind of panel, in fact, the stone honeycomb panel looks like a honeycomb. Stone honeycomb panels have the advantages of low radiation, little pollution, light weight, high strength, etc. They are widely used in modern house construction.
The advantages of the stone honeycomb panel:
A. Light weight
The marble veneer for the marble composite panel with aluminium plastic panel can be only 3 ~ 5mm thick. Commonly used composite panel with tiles or granite is only with a thickness of about 12mm. It saves much cost at least on the transportation. Accordingly, it is the best choice for the use on the building with a load limit.
B. high strength
Marble sandwiched with the tiles, granite, aluminum honeycomb panels and other composite, the bending and fracture resistance, shear strength were significantly improved, which greatly reduce the breaking rate during transportation, installation and use.
C.Improved anti-pollution ability
Regular original marble plate will change color or with dirty pollution on the surface if using the cement wet pasting. While for the composite panel, as the dense and hard substrate and the glue film, the above mentioned situation will not happen.
D. Easier to control color difference
The marble veneer used on the marble composite panels is three or four times more than the original plate. Therefore, the color and pattern can be 3 or 4 times more the same as the original marble plate.
E. Easy installation
Depending on the above characteristics, the efficiency and safety and costs of the installation process are greatly improved.
F. Break the restricted area
The original marble plate can be used on the inside and outside wall, ground, windowsill, porch, desktop, etc. But for the ceiling, no decoration company will take risk to use no matter it is marble or granite. The aluminum-plastic backed marble panels or aluminum honeycomb backed marble panel can break through the restricted area of stone honeycomb panel. Because it is very light that the weight of the whole body is only 1/5 to 1/10 of the original plate so that it is capable of being used on the ceiling.
G. Sound insulation and moisture-proof
An aluminum honeycomb backed stone panel transcends the properties of the original stone panel on the sound insulation, moisture and heat insulation and cold insulation performance because of the honeycomb structure.
H. Energy saving
Further to the above mentioned, Stone aluminum honeycomb panel, after installation in the indoor and outdoor, can greatly reduce the consumption of electricity and heat.
J. Cut costs
Due to thin and light stone composite material, it can save costs on transportation and installation. Furthermore, the finished composite stone panel will be more cost-efficient than their original plate.
Classical Marble Stone
|Marble Stone Type
|white or blue-gray
|Connemara, County Galway
|white and blue/black
|Pickens County, Georgia
|pink, salmon, rose
|Pickens County, Georgia
|Pickens and Gilmer Counties, Georgia
|Island of Paros (Πάρος), South Aegean
|pure-white, fine-grained semitranslucent
|Mount Pentelicus, Attica
|Isle of Purbeck, Dorset
|near Ruskeala, Karelia
|white, pinkish, reddish
|Poiana Ruscă Mountains, Caraș-Severin County
|yellow with violet, red, blue or white veins
|near Siena, Tuscany
|near Prilep, Pelagonia
|Swedish green marble
|near Kolmården, Södermanland
|Talladega County, Alabama
|uniform pure white
|near Marble, Colorado
|Makrana, Nagaur district, Rajasthan